MTS to MP4: camcorder clips that play anywhere

MTS to MP4 is usually a copy, so the camcorder's picture moves into the new file untouched. When to re-encode instead, for comb lines, size or missing sound.

On this page
  1. What’s in an MTS file
  2. Convert MTS to MP4 with Vidray
  3. Why do my MTS videos have lines on moving things?
  4. MTS to MP4 with FFmpeg
  5. Is one long recording split into several MTS files?
  6. Other free ways: HandBrake, VLC and online converters
  7. Why does my MTS file have no sound after converting?
  8. Which route fits your files
  9. Common questions

An MTS file is a recording from an AVCHD camcorder, and converting MTS to MP4 is usually a copy. The H.264 picture inside goes into MP4 as it is, so nothing is lost and it takes about as long as copying the file. Re-encode only for comb lines, missing sound or a smaller file.

What’s in an MTS file

MTS is the file AVCHD camcorders write. AVCHD is a recording format Panasonic and Sony set up in 2006, and many camcorders and some photo cameras record it. MTS is its file on the camera; M2TS is the same container under a longer name, and Vidray, HandBrake and FFmpeg open both. Microsoft’s Windows Media Player support page describes M2TS as the container “commonly used for high definition video on Blu-ray Disc and AVCHD”.

The AVCHD specification lists what can be inside (avchd-info.org, checked on 8 Nov 2026):

Part What AVCHD allows
Video H.264, at 1080/50i, 1080/60i, 1080/24p and 720p; 1080/50p and 60p since version 2.0
Sound Dolby Digital (AC-3), or uncompressed Linear PCM
Container MPEG-2 transport stream
Bitrate Up to 24 Mbit/s; 28 Mbit/s for 1080/50p and 60p

Two things in that table decide how your conversion goes. The “i” in 50i and 60i means interlaced: the camera records half-pictures called fields, every other line of the frame in turn, two for each frame. And 24 Mbit/s is up to 180 MB a minute, about 10.8 GB for an hour of video.

On the card, the files sit in a folder called STREAM, inside BDMV, inside AVCHD (often under PRIVATE). On a Mac, Finder shows the AVCHD folder as a single item: Control-click it, choose Show Package Contents, and open the folders inside until you reach STREAM.

Convert MTS to MP4 with Vidray

Vidray is a video compressor and converter for Windows and Mac that works on your own computer. It has two ways to turn an MTS file into an MP4, and they do different jobs.

Keep everything as it was: Convert

  1. Open Vidray and choose Convert.
  2. Pick MP4.
  3. Drop the MTS file in, or right-click it: Vidray, then Convert in File Explorer, or the Quick Action on a Mac.

The H.264 picture is copied bit for bit, and so is AC-3 sound. The row says “No re-encoding”. If the camera recorded Linear PCM, which MP4 players don’t expect, Vidray converts only the sound, to AAC at 192 kbit/s, and still copies the picture. The MP4 comes out about the same size as the MTS, because what’s inside is the same.

A copy keeps the picture as the camera recorded it, interlaced fields included. Whether you see them depends on the player. Some show comb lines on anything that moves, and that’s when you want the second way.

Remove comb lines and save space: Compress

  1. Choose Compress and pick “Same look”.
  2. Drop the MTS file in.

Vidray sees that the video is interlaced and turns the fields into whole frames before anything else, at the same frame rate: 50i becomes 25p, 60i becomes 30p. The picture is encoded again, as HEVC when your computer can encode it, with the quality set so it looks unchanged, and the sound becomes AAC. If the result isn’t at least 5% smaller than the original, Vidray deletes it and keeps the original. Need a clip under a set size for email or a chat app? Pick “Fit a size” instead, which makes an H.264 MP4 under the size you choose (how to compress a video to a specific size).

Vidray never overwrites a video. The new file goes beside it, or into a folder you choose in Settings. Free does all of this, 10 videos a month, with no watermark. A camcorder card holds dozens of clips, and Vidray Pro makes as many as you like, with no monthly limit. $24.99, once. Drop the STREAM folder itself: Vidray takes the videos in a dropped folder, not the folders inside it.

Why do my MTS videos have lines on moving things?

Because the video is interlaced and the player is showing both fields at once. A 1080/50i camcorder records 50 fields a second, and the two fields of a frame are taken a fiftieth of a second apart. On a TV of the camera’s era, that looked smooth. On a computer screen, a player that puts the two fields together without blending them shows a comb: thin horizontal lines along every edge that moves.

Copying the file into MP4 doesn’t change that, because the fields are copied too. Three ways to deal with them:

  • Re-encode with deinterlacing. Vidray’s Compress does it on its own. In HandBrake it’s the Deinterlace filter (Yadif, Bwdif or Decomb), and in FFmpeg the bwdif filter, both below.
  • Let the player do it. VLC has a Video › Deinterlace menu (VLC documentation, checked on 8 Nov 2026). That fixes playback on your computer, not the file.
  • Leave it. If the clip looks fine where you watch it, a copy is the better file: nothing was lost.

MTS to MP4 with FFmpeg

FFmpeg is free and runs on Windows, Mac and Linux from the command line. This copies the picture and the sound into an MP4 without re-encoding:

ffmpeg -i 00000.MTS -c copy 00000.mp4

If FFmpeg stops with “Could not find tag for codec pcm_bluray”, the camera recorded Linear PCM sound, which FFmpeg won’t copy into MP4. Copy the picture and convert the sound to AAC:

ffmpeg -i 00000.MTS -c:v copy -c:a aac -b:a 192k 00000.mp4

To remove comb lines, the picture has to be encoded again. This deinterlaces with bwdif at the same frame rate and encodes H.264 at a quality that looks close to the original:

ffmpeg -i 00000.MTS -vf bwdif=mode=send_frame -c:v libx264 -crf 20 -c:a aac -b:a 192k 00000.mp4

All three commands ran as written in FFmpeg 9.0.2 on 8 Nov 2026, on test files made to the AVCHD specification: 1080/50i H.264 with AC-3 or Linear PCM sound.

Is one long recording split into several MTS files?

It can be. A long take on a camcorder can end up spread over several MTS files, numbered in order (00000.MTS, 00001.MTS and so on). HandBrake’s documentation warns about this case: it “may be able to open individual video files from the Stream folder inside the BDMV folder”, but “this is not reliable” when “a single video stream spans multiple files” (HandBrake docs, checked on 8 Nov 2026). Vidray’s Convert makes each MTS its own MP4. To get one file, drop the pieces into Vidray’s Editor in order and choose Save: they match, so Vidray copies them into one MP4 without re-encoding.

On the command line, FFmpeg’s concat protocol reads the pieces end to end as one stream, and -c copy writes a single MP4 without re-encoding:

ffmpeg -i "concat:00000.MTS|00001.MTS|00002.MTS" -c copy recording.mp4

FFmpeg’s documentation calls it “physical concatenation” (FFmpeg protocols, checked on 8 Nov 2026). Use it only for the pieces of one recording, in order. In our test with FFmpeg 9.0.2, a recording cut in two came back as one 8-second MP4, while two separate clips joined the same way came out with broken timing. If the joined MP4 has comb lines, give it to Vidray’s Compress.

Other free ways: HandBrake, VLC and online converters

HandBrake is free, open source and has a queue for a whole card of clips. It always re-encodes: its documentation lists “Pass-through video without conversion” among what it does not do (HandBrake docs, checked on 8 Nov 2026). That makes it a good choice when you want comb lines removed and a smaller file anyway, and a slow one when a copy would have done. Turn on a Deinterlace filter for 50i or 60i footage.

VLC converts too: Media › Convert/Save, add the file, choose a profile from the Profile list and a destination file, then Start (VLC documentation, checked on 8 Nov 2026). The profile you pick decides whether the picture is encoded again.

Online converters need nothing installed, but the file has to be uploaded first, and camcorder files are big. FreeConvert’s MTS to MP4 page takes files up to 1 GB for free, about five and a half minutes at AVCHD’s top bitrate. Its paid plans raise that to 1.5 GB for $12.99 a month, up to 5 GB for $29.99 a month (FreeConvert pricing, checked on 8 Nov 2026).

Copies without re-encoding Removes comb lines Joins split files File stays on your computer Price
Vidray Yes, Convert Yes, Compress does it on its own Yes, Editor Yes Free, 10 videos a month; Pro $24.99 once
FFmpeg Yes Yes, with bwdif Yes Yes Free
HandBrake No Yes, Deinterlace filter Not reliable, its docs say Yes Free
VLC Depends on the profile During playback No Yes Free
FreeConvert Not stated Not stated Merge tool on paid plans No, uploaded; 1 GB free Free; paid from $12.99 a month

Checked on 8 Nov 2026 on each tool’s own documentation and pricing pages.

Why does my MTS file have no sound after converting?

Usually because the sound is AC-3 or Linear PCM, and the player or editor you opened the MP4 in doesn’t decode it. AC-3 is valid in MP4 and copying it keeps the original sound, but not every app plays it. Linear PCM from the camera doesn’t copy into MP4, which is why converters change it.

The fix is the same in every tool: keep the picture, make the sound AAC. With FFmpeg, it’s the second command above. In Vidray, Convert copies AC-3 as it is, so use Compress with “Same look”, which turns any sound but AAC into AAC.

Which route fits your files

  • “A few clips from an old camcorder that won’t open.” Vidray, Convert, MP4: a copy that keeps everything.
  • “Comb lines on everything that moves.” Vidray’s Compress with “Same look”, or HandBrake with a Deinterlace filter.
  • “A whole card of clips to archive.” Drop the STREAM folder into Vidray’s Convert to keep the originals’ quality, or into Compress to save space. Free makes 10 videos a month; Pro has no limit.
  • “One long recording in three files.” Vidray’s Editor joins them into one MP4 without re-encoding; on the command line, FFmpeg’s concat command does the same.
  • “A clip to send by email.” Compress with “Fit a size”, or read how to send a video that’s too large to email.

Most MTS files only need a new container, the way MKV to MP4 does. Re-encode when the picture shows comb lines, the sound won’t play, or the file is too big to keep, and keep the original until you’ve watched the MP4. To try it on your own clips, download Vidray for Windows or Mac.

Common questions

Does converting MTS to MP4 lose quality?

Not when the picture is copied. AVCHD video is H.264, which MP4 takes as it is, so Vidray’s Convert and FFmpeg with -c copy move it into the MP4 bit for bit. Quality only changes when the picture is encoded again, for example to remove comb lines or to make the file smaller.

What is the difference between MTS and M2TS?

None that matters for converting. Both are the same MPEG-2 transport stream container, used by AVCHD camcorders and Blu-ray. Camcorders write MTS files on the card, and some programs use the M2TS name for the same kind of file. Vidray, HandBrake and FFmpeg open both.

Why is my MP4 the same size as the MTS file?

Because the conversion was a copy. When the H.264 picture and the sound are moved into MP4 without re-encoding, the file holds the same data in a different container, so the size barely changes. To make it smaller, re-encode it, for example with Vidray’s Same look or HandBrake.

How do I convert a whole camcorder card of MTS files at once?

Use a tool with a queue. Vidray takes the whole STREAM folder from the card at once, in Convert or Compress: Free makes 10 videos a month, Pro has no limit. HandBrake’s queue is free but re-encodes every clip.

Can I convert MTS to MP4 on a Mac?

Yes. Vidray, HandBrake and FFmpeg all run on a Mac. On the card, Finder shows the AVCHD folder as a single item, so Control-click it, choose Show Package Contents and open the folders inside until you reach STREAM, where the MTS files are. Then convert them as on Windows.