LosslessCut alternative for frame-exact cuts (2026)

LosslessCut cuts without re-encoding, but its cuts start on keyframes. The alternatives that cut on the exact frame, what they re-encode and what they cost.

On this page
  1. What LosslessCut does well
  2. What to look for in a LosslessCut alternative
  3. The best LosslessCut alternatives
  4. LosslessCut vs the alternatives
  5. Which one should you pick?
  6. Common questions

A good LosslessCut alternative cuts on the exact frame you choose while still copying most of the video. LosslessCut copies the video without re-encoding, which is fast and keeps the picture, but by default its cuts start on the keyframe before the point you chose. Vidray’s Editor cuts on the exact frame and re-encodes only the few frames at each cut; on Windows, Bandicut does the same in its High-Speed mode.

What LosslessCut does well

LosslessCut calls itself “the swiss army knife of lossless video/audio editing” (GitHub, checked on 9 Nov 2026). It’s free and open source under the GPL, for Windows 10 and 11, macOS 13 or newer and Linux; version 3.70.2 came out on 28 October 2026 (LosslessCut). The Mac App Store version costs $18.99 and, by the FAQ, has “the same features, except for a few platform limitations” (Mac App Store, FAQ).

Its idea is simple: “LosslessCut simply cuts the data stream and directly copies it over” (LosslessCut). That’s why it’s fast on huge files and why the picture never changes. It merges “whole files with identical codecs”, and beyond cutting it can “add, remove, replace or extract tracks”, edit metadata and rotation, and create chapters (GitHub).

The limit is the keyframe. “Lossless cuts can only start at a keyframe”, and “frame accurate cuts at any position are not possible without re-encoding” (troubleshooting). With its default keyframe cut mode, a cut starts “from the nearest keyframe before your start cutpoint”. Its smart cut, which re-encodes “only the part from the cutpoint to the next keyframe”, is marked experimental: “It does not work for all files” and “don’t expect too much”. The Mac App Store listing says it outright: “This app is not used for exact cutting.”

LosslessCut also leaves out anything that needs re-encoding: its FAQ lists resizing, overlaying text or images and changing the audio volume among what it “can’t” do.

What to look for in a LosslessCut alternative

  1. Cuts on the exact frame. The first frame of the new file should be the one you chose, not the keyframe before it.
  2. Only the cuts re-encoded. A tool that encodes the whole video is exact but slow, and it costs quality.
  3. Joins that stay in sync. After many cuts, the sound should still be on the picture.
  4. It tells you before it starts. You should know whether a save will copy, re-encode the cuts or encode everything.
  5. Your system. Windows, Mac, Linux.
  6. The price, and what the free version leaves out. A watermark, a monthly limit, a trial.

The best LosslessCut alternatives

Vidray: exact cuts, only the cuts re-encoded

Vidray is a video app for Windows and Mac that works on your own computer, and its Editor cuts and joins on the exact frame. Drop one video or several, drag each clip’s edges on the timeline, and choose Save. Where the videos match, Vidray copies them and re-encodes only the frames between each cut and the nearest keyframe, in the video’s own codec, on the graphics card when it can. The bar next to Save says which of the three it will be: No re-encoding, Re-encodes only the cuts or Re-encodes.

On our test PC, it cut a 5-minute part out of a 44-minute, 6 GB NASA recording in 2.6 seconds: 17,967 frames, exactly the ones asked for. On clips made to check it, with every frame numbered and a flash and a beep every 23 frames, each cut kept exactly the frames we asked for, in MP4, MKV and HEVC, and after eight cuts the sound was never more than 11 milliseconds off its picture.

It goes further than cutting: Crop, Rotate, Speed, Sound and Watermark, each for the whole video. Turning, mirroring and the sound don’t re-encode the picture; crop, speed and a watermark encode the whole edit once. Vidray also compresses and converts videos.

Vidray Free does all of this for 10 videos a month, with no watermark. Pro has no monthly limit: $24.99 once, with every future update.

What it doesn’t do that LosslessCut does: Linux, open source, free use without a limit, and lossless work on tracks, chapters and metadata. iPhone videos in HEVC saved as MOV or MP4, and camcorder video in fields, are encoded whole when a cut isn’t on a keyframe.

Bandicut: a high-speed mode on Windows

Bandicut is “super fast video-cutting and joining software” from the makers of Bandicam, offered for Windows (Bandicut, checked on 9 Nov 2026). Its High-Speed mode copies “the footage between keyframes” and “will re-encode the small sections between your selected cut points and the nearest keyframes”, the same idea as a smart cut (Bandicut modes). It joins in High-Speed mode “only when all formats are exactly the same”.

The buy page lists a personal perpetual licence at $38.47, marked down from $54.95, or $25.16 a year (Bandicut buy page). The free version “adds a watermark to the end of an exported video” (Bandicut FAQ).

Avidemux: free, cut in copy mode or encode

Avidemux is “a free video editor designed for simple cutting, filtering and encoding tasks”, for Windows, Mac and Linux under the GPL (Avidemux, checked on 9 Nov 2026). In Copy mode it cuts without re-encoding, around keyframes: its guide warns that you may have to encode the video when the cut points don’t fall on them (Avidemux wiki). Its filters cover what LosslessCut leaves out, with a full encode.

FFmpeg: the command line under all of them

LosslessCut describes itself as an “FFmpeg GUI”, and FFmpeg itself is free. Its stream copy cuts at keyframes, like LosslessCut’s default; re-encoding the part gives an exact cut at the cost of encoding every frame. Our guide to trimming a video without losing quality has both commands, measured on the same recording.

LosslessCut vs the alternatives

Checked on 9 Nov 2026 on each tool’s own pages.

LosslessCut Vidray Bandicut Avidemux FFmpeg
Price Free; $18.99 on the Mac App Store Free, 10 videos a month; Pro $24.99 once $38.47 perpetual (sale), or $25.16 a year Free Free
Systems Windows, Mac, Linux Windows, Mac Windows Windows, Mac, Linux Windows, Mac, Linux
Exact cut without encoding everything Smart cut, experimental Yes, only the cuts re-encoded Yes, High-Speed mode No: copy at keyframes, or encode No: copy at keyframes, or encode
Join files without re-encoding Identical codec parameters Matching files Exactly the same formats Not stated Same streams
Watermark and volume No Yes Not stated With filters, encoded With filters, encoded
Free version limit None 10 videos a month Watermark at the end None None
Open source Yes, GPL-2.0 No No Yes, GPL Yes

Which one should you pick?

  • “I cut long recordings and a second either side doesn’t matter.” Stay with LosslessCut: it’s free and nothing is faster than a plain copy.
  • “I need the cut on the exact frame, and the picture untouched elsewhere.” Vidray on Windows or Mac; Bandicut if you’re on Windows and prefer its tools.
  • “I’m on Linux.” LosslessCut, Avidemux or FFmpeg.
  • “I cut and join clips from different cameras.” They have to be encoded once. Vidray does it at the first video’s size; see how to merge videos without losing quality.
  • “I cut a few videos a month.” Vidray Free covers 10 a month; past that, Pro is $24.99 once.

Try the cut LosslessCut can’t promise on one of your own recordings: drop it into Vidray’s Editor and compare the first frame with the one you chose. Download Vidray for Windows or Mac, or compare Free and Pro.

Common questions

Is LosslessCut really lossless?

Yes for what it copies: it cuts the data stream and copies it over, so the frames don’t change. The catch is where the cut lands. By default a cut starts on the keyframe before the point you chose, and frame-exact cuts need re-encoding, which only its experimental smart cut does.

Why does LosslessCut start my cut too early?

Because a copy can only start on a keyframe. With keyframe cut mode on, the default, LosslessCut starts from the nearest keyframe before your cut point, so the clip begins up to a few seconds early, depending on how far apart the video’s keyframes are. Its troubleshooting page suggests trying both cut modes.

Is there a frame-accurate alternative to LosslessCut?

Yes. Vidray’s Editor on Windows and Mac cuts on the exact frame and re-encodes only the frames between each cut and the nearest keyframe. Bandicut’s High-Speed mode on Windows works the same way. LosslessCut’s own smart cut does too, but its documentation calls it experimental.

Is LosslessCut free?

Yes. It’s free and open source on GitHub for Windows, Mac and Linux. The Mac App Store version costs $18.99 and there is a Microsoft Store version; its FAQ says the store versions have the same features apart from a few platform limitations.

Does Vidray run on Linux?

No. Vidray runs on Windows 10 and 11 (64-bit) and on macOS 11 or later, on Apple silicon and Intel Macs. On Linux, LosslessCut, Avidemux and FFmpeg are the free options for cutting video without re-encoding it.