Remove audio from a video on Windows or Mac
Removing audio from a video costs no quality when the app drops the sound track and copies the picture. Four ways on Windows and Mac, and how to mute one part.

On this page
You can remove audio from a video without touching the picture. Sound and picture are separate tracks inside the file, so an app can leave the sound out and copy the video track as it is, frame for frame. Vidray and FFmpeg work that way. Clipchamp, the editor that comes with Windows 11, exports a new MP4 instead.
Remove the sound with Vidray
Vidray is a video app for Windows and Mac that works on your own computer. Its Editor cuts, joins, crops and turns videos, and its Sound tool turns the volume up, down or off for the whole video.
- Open Vidray. It opens on the Editor.
- Drop the video on the window, or choose Choose videos.
- Choose Sound in the tools on the right.
- Turn on Mute. The Volume reading changes to Off.
- Choose Save. The new file goes next to the original, which stays as it was.
Before you save, the bar next to Save says what will happen and about how long it will take. For a whole MP4 or MOV with nothing else changed, it says No re-encoding. Vidray copies the video track into the new file and writes no sound track at all, so the result isn’t a video with silent sound: there is no sound in it. The app puts it in one line: “Changing the sound doesn’t re-encode the picture.”
The bar says Re-encodes when something else changes the picture:
- Crop, Speed or Watermark is on. They change every frame, so the whole video is encoded once, on the graphics card when it can.
- The format you save in can’t hold the video as it is. Save as set to Same as source keeps the format; choosing another one, such as WebM for an H.264 video, means encoding.
If you only want the sound quieter, leave Mute off and drag Volume down, from 200% to 5%. Then the sound is encoded again and the picture is still copied. Cuts work together with Mute: drag the clip’s edges to trim the video in the same Save, and only the frames at each cut are re-encoded.
Vidray Free has every tool, with no watermark and no trial clock, and makes 10 videos a month; each Save counts once. Pro has no monthly limit, for $24.99 once (compare Free and Pro). Your videos never leave your computer.
Does removing the audio make a video smaller?
Only a little. Sound takes far fewer bits than the picture, so a video without it is usually a few percent smaller, not half.
Here is a real file. The NASA recording we used for our Editor tests is 44 minutes long and 6.07 GB, with stereo AAC sound at 384 kbit/s. At that bitrate the sound takes about 127 MB, 2.1% of the file. Without it, the video is still 5.95 GB.
YouTube’s recommended upload settings tell the same story: 384 kbps for stereo sound, 8 Mbps for 1080p video at 24 to 30 frames a second (YouTube Help, checked on 11 Nov 2026). At those numbers the sound is about 5% of the file. Next to 4K video at 35 to 45 Mbps, it’s about 1%.
A minute of sound at 384 kbit/s is 2.9 MB; video file size per minute has the formula. If the file has to fit an email or a chat limit, removing the sound won’t get it there. Compressing it will.
Four ways to remove audio from a video
Checked on 11 Nov 2026 on Apple’s, Microsoft’s and FFmpeg’s own help pages.
| Vidray | Clipchamp | QuickTime Player | FFmpeg | |
|---|---|---|---|---|
| Runs on | Windows and Mac | Comes with Windows 11 | Comes with macOS | Windows, Mac and Linux |
| What happens to the picture | Copied as it is | Exported again as MP4 | Not stated by Apple | Copied as it is with -c copy |
| Mutes only one part | No, the whole video | Yes, a split clip | No, the whole movie | Yes, with a filter |
| What comes out | The source’s format, or the one you choose | MP4 | MOV, through Export As | Any format you name |
| Price | Free for 10 videos a month; Pro $24.99 once | Free up to 1080p | Free | Free and open source |
| How you use it | App | App | App | Command line |
Clipchamp on Windows 11
Clipchamp mutes a clip on its timeline. Microsoft’s steps: click the video on the timeline, then click the speaker symbol at the left of the clip; it changes to a speaker with a cross (Microsoft Support, checked on 11 Nov 2026). “The selected clip’s audio will not be heard in the export.” To get rid of the sound for good, the same page shows how to detach it into its own row and delete it.
Then choose Export and a resolution. Clipchamp exports “an MP4 file in one of the resolutions you choose” (Microsoft Support), and the free plan goes “up to 1080p (full HD) video resolution for free, with no watermarks” (Clipchamp pricing, checked on 11 Nov 2026). 4K needs a Microsoft 365 Personal or Family subscription. A 4K phone video muted on the free plan comes out as a 1080p MP4.
QuickTime Player on a Mac
QuickTime Player has the command in its menu. Apple’s steps: open the movie and “choose Edit > Remove Audio”. “Your file is now video only” (Apple Support, checked on 11 Nov 2026).
Apple’s page stops there. To keep the result as a new file, choose File > Export As and a resolution: the result is a MOV in H.264 or HEVC, and “QuickTime Player doesn’t export movies as MP4 videos” (Apple Support). Apple doesn’t say whether Export As copies the picture or encodes it again; it says the resolution and data rate “depend on the original”.
FFmpeg, on any computer
FFmpeg is free and does it in one line. -c copy copies every track it keeps, and -an leaves out the sound:
ffmpeg -i video.mp4 -c copy -an video-no-sound.mp4
FFmpeg’s documentation says -an “disables audio recording”, and a copy runs “with no decoding or encoding”, so “there is no quality loss” (FFmpeg, checked on 11 Nov 2026). On our sample file, the copied video track matched the original’s packet for packet.
The first command keeps one track of each kind. For an MKV with several subtitle tracks, map them all and then take the sound back out, so every subtitle stays:
ffmpeg -i video.mkv -map 0 -map -0:a -c copy video-no-sound.mkv
Can you remove the audio from only part of a video?
Yes, but not with Vidray’s Sound tool, which works on the whole video. Two ways do it.
In Clipchamp, put the playhead where the quiet part starts and click the split button on the editing toolbar (Microsoft Support, checked on 11 Nov 2026). Split again where it ends, then mute only that clip. Other unmuted clips “will still be audible”, in Microsoft’s words. The export is a new MP4, as above.
With FFmpeg, the volume filter can turn the sound off between two times and leave the rest. This one silences seconds 10 to 20, copies the picture, and encodes the sound again as AAC:
ffmpeg -i video.mp4 -c:v copy -af "volume=0:enable='between(t,10,20)'" -c:a aac -b:a 192k video-part-muted.mp4
We ran it on a 30-second sample: the sound between 10 and 20 seconds dropped to silence, and the rest kept its level. If you don’t need those seconds at all, cutting them out is simpler. Vidray’s Editor does that on the exact frame, and joins what’s left into one file.
Which way to use
- “I want the sound gone and the picture untouched.” Vidray on Windows or Mac, or FFmpeg if you’re at home on the command line. Both copy the video track as it is.
- “I’m already editing the video in Clipchamp.” Mute the clip there and export. On the free plan, the result is 1080p at most.
- “One clip on a Mac, nothing to install.” QuickTime Player’s Edit > Remove Audio, then Export As.
- “Only a few seconds have to go quiet.” Clipchamp’s split and mute, or the FFmpeg volume filter above.
- “I want the sound, not the picture.” That’s the other way round: Vidray’s Extract audio saves the sound as MP3, M4A, WAV, FLAC and more.
Start with the video in front of you: drop it into the Editor, turn on Mute, and read the bar before you save. Download Vidray for Windows or Mac.
Common questions
Does removing audio from a video reduce its quality?
No, as long as the picture is copied rather than encoded again. Vidray’s Mute and FFmpeg’s -c copy with -an copy the video track as it is and leave the sound out. Editors that export a new file, such as Clipchamp, encode every frame again, and on Clipchamp’s free plan the export stops at 1080p.
Does removing the sound make a video file smaller?
Only slightly, because sound takes far fewer bits than the picture. In a 44-minute, 6.07 GB recording with 384 kbit/s stereo sound, the sound is about 127 MB, 2.1% of the file. To make a video much smaller, compress it; removing the sound alone won’t get it under an email or chat limit.
How do I remove audio from a video on Windows 11?
Clipchamp, which comes with Windows 11, mutes a clip with the speaker symbol on its timeline and exports a new MP4, up to 1080p on the free plan. Vidray’s Editor removes the sound and copies the picture as it is: turn on Mute under Sound and save. Free covers 10 videos a month.
Can I remove audio from an MP4 without re-encoding?
Yes. The sound is a separate track, so it can be left out while the video track is copied. FFmpeg does it with -c copy -an, and Vidray’s Editor does it when you turn on Mute and save: the bar next to Save says No re-encoding for a whole MP4 with nothing else changed.
How do I remove the sound from only part of a video?
Split the video around that part and mute only that piece, as Clipchamp does on its timeline, or use FFmpeg’s volume filter with a start and end time, which copies the picture and encodes the sound again. Vidray’s Sound tool works on the whole video, but its Editor can cut the part out entirely.


